Epoksi Sistemler

Tilo-L8202

Polyether modified silicone leveling additive with defoaming properties. It is particularly suitable for non-polar to medium-polar paint systems. Its defoaming activity rises with increasing coating polarity. In automotive and industrial coatings, it will not exhibit problems with ghosting or telegraphing.

Tilo-L8210

Polyether modified poly-dimethyl-siloxane Levelling agent for solvent based, solvent-free and also water-based systems. Strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all printing ink systems. In aqueous systems, it increases anti-blocking properties. Tilo-L8210 displays excellent compatibility and can be used as an anti-cratering additive.

Tilo-L8217

Solvent-free silicone surface additive for the wetting of critical substrates and surface slip. It improves dust and spray dust acceptance and allows higher film thickness on vertical surfaces. It also improves flatting agent orientation.

Tilo-L8522

Acrylic leveling additives for solvent-based systems,especially recommended for PE primer paints. It can improve leveling and gloss, can produce a long wave effect and avoid cratering in the system. The acrylate additive doesn’t negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced. Additionally it acts as a defoaming and air release agent. It is thermally stable.

Tilo-L8538

Fluorocarbon-modified polymer Levelling agent for solvent based and solvent-free coatings. It is especially suitable for stoving enamels based on alkyd, acrylic and polyester resins, polyurethane coatings, 2-pack epoxy compounds, air-dried alkyd systems. Improves levelling , prevents cratering, helps substrate wetting, does not interfere with intercoat adhesion.